On Fri, Mar 30, 2012 at 09:46:53PM +0800, Ying-Chun Liu (PaulLiu) wrote:
From: "Ying-Chun Liu (PaulLiu)" paul.liu@linaro.org
Add anatop regulators to imx6q.dtsi for all imx6q platforms.
Signed-off-by: Ying-Chun Liu (PaulLiu) paul.liu@linaro.org Signed-off-by: Richard Zhao richard.zhao@linaro.org Cc: Shawn Guo shawn.guo@linaro.org
arch/arm/boot/dts/imx6q.dtsi | 86 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 86 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 263e8f3..79f59e7 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -346,6 +346,92 @@ compatible = "fsl,imx6q-anatop"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
#address-cells = <1>;#size-cells = <0>;
These two lines are not needed now. Removed them and applied the patch. Thanks.
Regards, Shawn
regulator-1p1@110 {compatible = "fsl,anatop-regulator";regulator-name = "vdd1p1";regulator-min-microvolt = <800000>;regulator-max-microvolt = <1375000>;regulator-always-on;anatop-reg-offset = <0x110>;anatop-vol-bit-shift = <8>;anatop-vol-bit-width = <5>;anatop-min-bit-val = <4>;anatop-min-voltage = <800000>;anatop-max-voltage = <1375000>;};regulator-3p0@120 {compatible = "fsl,anatop-regulator";regulator-name = "vdd3p0";regulator-min-microvolt = <2800000>;regulator-max-microvolt = <3150000>;regulator-always-on;anatop-reg-offset = <0x120>;anatop-vol-bit-shift = <8>;anatop-vol-bit-width = <5>;anatop-min-bit-val = <0>;anatop-min-voltage = <2625000>;anatop-max-voltage = <3400000>;};regulator-2p5@130 {compatible = "fsl,anatop-regulator";regulator-name = "vdd2p5";regulator-min-microvolt = <2000000>;regulator-max-microvolt = <2750000>;regulator-always-on;anatop-reg-offset = <0x130>;anatop-vol-bit-shift = <8>;anatop-vol-bit-width = <5>;anatop-min-bit-val = <0>;anatop-min-voltage = <2000000>;anatop-max-voltage = <2750000>;};regulator-vddcore@140 {compatible = "fsl,anatop-regulator";regulator-name = "cpu";regulator-min-microvolt = <725000>;regulator-max-microvolt = <1450000>;regulator-always-on;anatop-reg-offset = <0x140>;anatop-vol-bit-shift = <0>;anatop-vol-bit-width = <5>;anatop-min-bit-val = <1>;anatop-min-voltage = <725000>;anatop-max-voltage = <1450000>;};regulator-vddpu@140 {compatible = "fsl,anatop-regulator";regulator-name = "vddpu";regulator-min-microvolt = <725000>;regulator-max-microvolt = <1450000>;regulator-always-on;anatop-reg-offset = <0x140>;anatop-vol-bit-shift = <9>;anatop-vol-bit-width = <5>;anatop-min-bit-val = <1>;anatop-min-voltage = <725000>;anatop-max-voltage = <1450000>;};regulator-vddsoc@140 {compatible = "fsl,anatop-regulator";regulator-name = "vddsoc";regulator-min-microvolt = <725000>;regulator-max-microvolt = <1450000>;regulator-always-on;anatop-reg-offset = <0x140>;anatop-vol-bit-shift = <18>;anatop-vol-bit-width = <5>;anatop-min-bit-val = <1>;anatop-min-voltage = <725000>;anatop-max-voltage = <1450000>;}; };usbphy@020c9000 { /* USBPHY1 */ -- 1.7.9.1