This patch are based on Eric Bénard's patches below, and only picks up i.mx51 babbage specific bits.
- cpuimx51: update board support - clock-mx51: factorize clk_set_parent and clk_get_rate - imx-esdhc: update devices registration
Signed-off-by: Shawn Guo shawn.gsc@gmail.com --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx51_babbage.c | 20 ++ arch/arm/mach-mx5/clock-mx51.c | 286 +++++++++++++++-------- arch/arm/mach-mx5/devices-imx51.h | 17 ++ arch/arm/plat-mxc/devices/Kconfig | 3 + arch/arm/plat-mxc/devices/Makefile | 1 + arch/arm/plat-mxc/devices/platform-esdhc.c | 71 ++++++ arch/arm/plat-mxc/include/mach/devices-common.h | 10 + arch/arm/plat-mxc/include/mach/esdhc.h | 16 ++ arch/arm/plat-mxc/include/mach/iomux-mx51.h | 39 +++- arch/arm/plat-mxc/include/mach/mx51.h | 16 +- 11 files changed, 360 insertions(+), 120 deletions(-) create mode 100644 arch/arm/mach-mx5/devices-imx51.h create mode 100644 arch/arm/plat-mxc/devices/platform-esdhc.c create mode 100644 arch/arm/plat-mxc/include/mach/esdhc.h
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 0848db5..a263666 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -10,6 +10,7 @@ comment "MX5 platforms:"
config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" + select IMX_HAVE_PLATFORM_ESDHC help Include support for MX51 Babbage platform, also known as MX51EVK in u-boot. This includes specific configurations for the board and its diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 6e384d9..476bfe4 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -31,6 +31,7 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h>
+#include "devices-imx51.h" #include "devices.h"
#define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */ @@ -93,6 +94,22 @@ static struct pad_desc mx51babbage_pads[] = {
/* USB HUB reset line*/ MX51_PAD_GPIO_1_7__GPIO_1_7, + + /* SD 1 */ + MX51_PAD_SD1_CMD__SD1_CMD, + MX51_PAD_SD1_CLK__SD1_CLK, + MX51_PAD_SD1_DATA0__SD1_DATA0, + MX51_PAD_SD1_DATA1__SD1_DATA1, + MX51_PAD_SD1_DATA2__SD1_DATA2, + MX51_PAD_SD1_DATA3__SD1_DATA3, + + /* SD 2 */ + MX51_PAD_SD2_CMD__SD2_CMD, + MX51_PAD_SD2_CLK__SD2_CLK, + MX51_PAD_SD2_DATA0__SD2_DATA0, + MX51_PAD_SD2_DATA1__SD2_DATA1, + MX51_PAD_SD2_DATA2__SD2_DATA2, + MX51_PAD_SD2_DATA3__SD2_DATA3, };
/* Serial ports */ @@ -268,6 +285,9 @@ static void __init mxc_board_init(void) /* setback USBH1_STP to be function */ mxc_iomux_v3_setup_pad(&usbh1stp); babbage_usbhub_reset(); + + imx51_add_esdhc(0, NULL); + imx51_add_esdhc(1, NULL); }
static void __init mx51_babbage_timer_init(void) diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 6af69de..769ca05 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -41,35 +41,67 @@ static struct clk usboh3_clk;
#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
-static int _clk_ccgr_enable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); - - return 0; +/* calculate best pre and post dividers to get the required divider */ +static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post, + u32 max_pre, u32 max_post) +{ + if (div >= max_pre * max_post) { + *pre = max_pre; + *post = max_post; + } else if (div >= max_pre) { + u32 min_pre, temp_pre, old_err, err; + min_pre = DIV_ROUND_UP(div, max_post); + old_err = max_pre; + for (temp_pre = max_pre; temp_pre >= min_pre; temp_pre--) { + err = div % temp_pre; + if (err == 0) { + *pre = temp_pre; + break; + } + err = temp_pre - err; + if (err < old_err) { + old_err = err; + *pre = temp_pre; + } + } + *post = DIV_ROUND_UP(div, *pre); + } else { + *pre = div; + *post = 1; + } }
-static void _clk_ccgr_disable(struct clk *clk) -{ - u32 reg; - reg = __raw_readl(clk->enable_reg); - reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); +static void _clk_ccgr_setclk(struct clk *clk, unsigned mode) + { + u32 reg = __raw_readl(clk->enable_reg);
+ reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); + reg |= mode << clk->enable_shift; + + __raw_writel(reg, clk->enable_reg); } - -static void _clk_ccgr_disable_inwait(struct clk *clk) + +static int _clk_ccgr_enable(struct clk *clk) { - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); - reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON); + return 0; + } + + static void _clk_ccgr_disable(struct clk *clk) + { + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF); } + +static int _clk_ccgr_enable_inrun(struct clk *clk) +{ + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE); + return 0; + } + + static void _clk_ccgr_disable_inwait(struct clk *clk) + { + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE); + }
/* * For the 4-to-1 muxed input clock @@ -542,64 +574,6 @@ static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent) return 0; }
-static unsigned long clk_uart_get_rate(struct clk *clk) -{ - u32 reg, prediv, podf; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - reg = __raw_readl(MXC_CCM_CSCDR1); - prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >> - MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1; - podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >> - MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1; - - return parent_rate / (prediv * podf); -} - -static int _clk_uart_set_parent(struct clk *clk, struct clk *parent) -{ - u32 reg, mux; - - mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, - &lp_apm_clk); - reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK; - reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET; - __raw_writel(reg, MXC_CCM_CSCMR1); - - return 0; -} - -static unsigned long clk_usboh3_get_rate(struct clk *clk) -{ - u32 reg, prediv, podf; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - reg = __raw_readl(MXC_CCM_CSCDR1); - prediv = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK) >> - MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET) + 1; - podf = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK) >> - MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET) + 1; - - return parent_rate / (prediv * podf); -} - -static int _clk_usboh3_set_parent(struct clk *clk, struct clk *parent) -{ - u32 reg, mux; - - mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, - &lp_apm_clk); - reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK; - reg |= mux << MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET; - __raw_writel(reg, MXC_CCM_CSCMR1); - - return 0; -} - static unsigned long get_high_reference_clock_rate(struct clk *clk) { return external_high_reference; @@ -715,18 +689,6 @@ static struct clk ipg_perclk = { .set_parent = _clk_ipg_per_set_parent, };
-static struct clk uart_root_clk = { - .parent = &pll2_sw_clk, - .get_rate = clk_uart_get_rate, - .set_parent = _clk_uart_set_parent, -}; - -static struct clk usboh3_clk = { - .parent = &pll2_sw_clk, - .get_rate = clk_usboh3_get_rate, - .set_parent = _clk_usboh3_set_parent, -}; - static struct clk ahb_max_clk = { .parent = &ahb_clk, .enable_reg = MXC_CCM_CCGR0, @@ -762,21 +724,125 @@ static struct clk kpp_clk = { .id = 0, };
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ +#define DEFINE_CLOCK_MAX(name, i, er, es, pfx, p, s) \ static struct clk name = { \ .id = i, \ .enable_reg = er, \ .enable_shift = es, \ - .get_rate = gr, \ - .set_rate = sr, \ - .enable = _clk_ccgr_enable, \ - .disable = _clk_ccgr_disable, \ + .get_rate = pfx##_get_rate, \ + .set_rate = pfx##_set_rate, \ + .set_parent = pfx##_set_parent, \ + .enable = _clk_max_enable, \ + .disable = _clk_max_disable, \ .parent = p, \ .secondary = s, \ }
-/* DEFINE_CLOCK(name, id, enable_reg, enable_shift, - get_rate, set_rate, parent, secondary); */ +#define CLK_GET_RATE(name, nr, bitsname) \ +static unsigned long clk_##name##_get_rate(struct clk *clk) \ +{ \ + u32 reg, pred, podf; \ + \ + reg = __raw_readl(MXC_CCM_CSCDR##nr); \ + pred = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK) \ + >> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET; \ + podf = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK) \ + >> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET; \ + \ + return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), \ + (pred + 1) * (podf + 1)); \ +} + +#define CLK_SET_PARENT(name, nr, bitsname) \ +static int clk_##name##_set_parent(struct clk *clk, struct clk *parent) \ +{ \ + u32 reg, mux; \ + \ + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, \ + &pll3_sw_clk, &lp_apm_clk); \ + reg = __raw_readl(MXC_CCM_CSCMR##nr) & \ + ~MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_MASK; \ + reg |= mux << MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_OFFSET; \ + __raw_writel(reg, MXC_CCM_CSCMR##nr); \ + \ + return 0; \ +} + +#define CLK_SET_RATE(name, nr, bitsname) \ +static int clk_##name##_set_rate(struct clk *clk, unsigned long rate) \ +{ \ + u32 reg, div, parent_rate; \ + u32 pre = 0, post = 0; \ + \ + parent_rate = clk_get_rate(clk->parent); \ + div = parent_rate / rate; \ + \ + if ((parent_rate / div) != rate) \ + return -EINVAL; \ + \ + __calc_pre_post_dividers(div, &pre, &post, \ + (MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK >> \ + MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET) + 1, \ + (MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK >> \ + MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET) + 1);\ + \ + /* Set sdhc1 clock divider */ \ + reg = __raw_readl(MXC_CCM_CSCDR##nr) & \ + ~(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK \ + | MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK); \ + reg |= (post - 1) << \ + MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET; \ + reg |= (pre - 1) << \ + MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET; \ + __raw_writel(reg, MXC_CCM_CSCDR##nr); \ + \ + return 0; \ +} + +/* UART */ +CLK_GET_RATE(uart, 1, UART) +CLK_SET_PARENT(uart, 1, UART) + +static struct clk uart_root_clk = { + .parent = &pll2_sw_clk, + .get_rate = clk_uart_get_rate, + .set_parent = clk_uart_set_parent, +}; + +/* USBOH3 */ +CLK_GET_RATE(usboh3, 1, USBOH3) +CLK_SET_PARENT(usboh3, 1, USBOH3) + +static struct clk usboh3_clk = { + .parent = &pll2_sw_clk, + .get_rate = clk_usboh3_get_rate, + .set_parent = clk_usboh3_set_parent, +}; + +/* eSDHC */ +CLK_GET_RATE(esdhc1, 1, ESDHC1_MSHC1) +CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1) +CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1) + +CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2) +CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2) +CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2) + +#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = gr, \ + .set_rate = sr, \ + .enable = e, \ + .disable = d, \ + .parent = p, \ + .secondary = s, \ + } + +#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ + DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s)
/* Shared peripheral bus arbiter */ DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET, @@ -814,6 +880,16 @@ DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, NULL, NULL, &ipg_clk, NULL);
+/* eSDHC */ +DEFINE_CLOCK_FULL(esdhc1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG0_OFFSET, + NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL); +DEFINE_CLOCK_MAX(esdhc1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG1_OFFSET, + clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk); +DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET, + NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL); +DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET, + clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk); + #define _REGISTER_CLOCK(d, n, c) \ { \ .dev_id = d, \ @@ -837,6 +913,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk) _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) };
static void clk_tree_init(void) @@ -880,6 +958,14 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc, /* set the usboh3_clk parent to pll2_sw_clk */ clk_set_parent(&usboh3_clk, &pll2_sw_clk);
+ /* Set SDHC parents to be PLL2 */ + clk_set_parent(&esdhc1_clk, &pll2_sw_clk); + clk_set_parent(&esdhc2_clk, &pll2_sw_clk); + + /* set SDHC root clock as 166.25MHZ*/ + clk_set_rate(&esdhc1_clk, 166250000); + clk_set_rate(&esdhc2_clk, 166250000); + /* System timer */ mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_MXC_INT_GPT); diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h new file mode 100644 index 0000000..1c43940 --- /dev/null +++ b/arch/arm/mach-mx5/devices-imx51.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2010 Jason Wang <jason77.wang at gmail.com> + * + * based on mach-mx3/devices-imx35.h which is + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig at pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx51.h> +#include <mach/devices-common.h> + +extern const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst; +#define imx51_add_esdhc(id, pdata) \ + imx_add_esdhc(&imx51_esdhc_data[id], pdata) diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig index 9ab784b..4730d2c 100644 --- a/arch/arm/plat-mxc/devices/Kconfig +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -13,3 +13,6 @@ config IMX_HAVE_PLATFORM_MXC_NAND
config IMX_HAVE_PLATFORM_SPI_IMX bool + +config IMX_HAVE_PLATFORM_ESDHC + bool diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index 347da51..81aa17e 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_ESDHC) += platform-esdhc.o diff --git a/arch/arm/plat-mxc/devices/platform-esdhc.c b/arch/arm/plat-mxc/devices/platform-esdhc.c new file mode 100644 index 0000000..668050b --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-esdhc.c @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang at pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <mach/hardware.h> +#include <mach/devices-common.h> +#include <mach/esdhc.h> + +#define imx_esdhc_imx_data_entry_single(soc, _id, hwid) \ + { \ + .id = _id, \ + .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \ + .irq = soc ## _INT_ESDHC ## hwid, \ + } + +#define imx_esdhc_imx_data_entry(soc, id, hwid) \ + [id] = imx_esdhc_imx_data_entry_single(soc, id, hwid) + +#ifdef CONFIG_ARCH_MX25 +const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst = { +#define imx25_esdhc_data_entry(_id, _hwid) \ + imx_esdhc_imx_data_entry(MX25, _id, _hwid) + imx25_esdhc_data_entry(0, 1), + imx25_esdhc_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst = { +#define imx35_esdhc_data_entry(_id, _hwid) \ + imx_esdhc_imx_data_entry(MX35, _id, _hwid) + imx35_esdhc_data_entry(0, 1), + imx35_esdhc_data_entry(1, 2), + imx35_esdhc_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst = { +#define imx51_esdhc_data_entry(_id, _hwid) \ + imx_esdhc_imx_data_entry(MX51, _id, _hwid) + imx51_esdhc_data_entry(0, 1), + imx51_esdhc_data_entry(1, 2), + imx51_esdhc_data_entry(2, 3), + imx51_esdhc_data_entry(3, 4), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_esdhc( + const struct imx_esdhc_imx_data *data, + const struct esdhc_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("sdhci-esdhc-imx", data->id, res, + ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index c5f68c5..af7a232 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -58,3 +58,13 @@ struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, struct platform_device *__init imx_add_spi_imx(int id, resource_size_t iobase, resource_size_t iosize, int irq, const struct spi_imx_master *pdata); + +#include <mach/esdhc.h> +struct imx_esdhc_imx_data { + int id; + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_esdhc( + const struct imx_esdhc_imx_data *data, + const struct esdhc_platform_data *pdata); diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h new file mode 100644 index 0000000..0724bcd --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/esdhc.h @@ -0,0 +1,16 @@ +/* + * Copyright 2010 Wolfram Sang <w.sang at pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#ifndef __ASM_ARCH_IMX_ESDHC_H +#define __ASM_ARCH_IMX_ESDHC_H + +struct esdhc_platform_data { + unsigned int wp_gpio; /* write protect pin */ +}; +#endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index 21bfa46..935f790 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -45,6 +45,9 @@ typedef enum iomux_config { PAD_CTL_PKE | PAD_CTL_HYS) #define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \ PAD_CTL_SRE_FAST) +#define MX51_SDHCI_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_SRE_FAST | \ + PAD_CTL_DVS)
/* * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> @@ -294,20 +297,32 @@ typedef enum iomux_config { #define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS) +#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) #define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, IOMUX_CONFIG_SION, 0x0, 1, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS) +#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) #define MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO_1_2__I2C2_SCL IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \ 0x9b8, 3, MX51_I2C_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index 5aad344..5be17ae 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -76,13 +76,13 @@ #define MX51_SPBA0_BASE_ADDR_VIRT 0xFB100000 #define MX51_SPBA0_SIZE SZ_1M
-#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000) -#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000) +#define MX51_ESDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000) +#define MX51_ESDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000) #define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000) #define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000) #define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000) -#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000) -#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000) +#define MX51_ESDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000) +#define MX51_ESDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000) #define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000) #define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000) #define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000) @@ -319,10 +319,10 @@ */ #define MX51_MXC_INT_BASE 0 #define MX51_MXC_INT_RESV0 0 -#define MX51_MXC_INT_MMC_SDHC1 1 -#define MX51_MXC_INT_MMC_SDHC2 2 -#define MX51_MXC_INT_MMC_SDHC3 3 -#define MX51_MXC_INT_MMC_SDHC4 4 +#define MX51_INT_ESDHC1 1 +#define MX51_INT_ESDHC2 2 +#define MX51_INT_ESDHC3 3 +#define MX51_INT_ESDHC4 4 #define MX51_MXC_INT_RESV5 5 #define MX51_MXC_INT_SDMA 6 #define MX51_MXC_INT_IOMUX 7