7 Sep
2017
7 Sep
'17
7:37 p.m.
On 5 September 2017 at 03:01, Xiang Dai xiangx.dai@intel.com wrote:
Hi!
I test with below two cpu to test:
- Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
With below action: make -C cpuidle cpuidle_killer make -C thermal run_tests
It shows several thermal zone and cooling device on my machine. But there will be following err in the test suite. And need your help
- in thermal_01: There is not 'mode' exists in
'/sys/devices/virtual/thermal/thermal_zone0'. Is this caused by hw or drives? Or may I change kernel config to meet it?
Not sure, but mode is an optional thermal zone attribute.
- in thermal_03 and thermal_06: It will says glmark2 not found... It seems my machine doesn't have
some devices or features. I want to know which kind of machine could meet the need.
You need the glmark2 binary. Clone this repository and follow the instructions to build: https://github.com/glmark2/glmark2 and try running the thermal_03 and thermal_06 test again.
- in thermal_04: there will be err when checking colling devices with
"effective cool=-1000". It looks like an illegal value passed in. If it could be OK on some other machine. It should be caused by some feature of my machine. Could we abandon some case by pass some parameter in?
I don't know any case where a negative value would be valid. The smallest acceptable value for a cooling state is 0.
- in thermal_05: can't find cpufreq in colling devices. Could this fixed by some
operation on kernel?
This particular test was created and run with the generic DT based cpufreq driver enabled on arm, so I don't know if there is something equivalent for x86.
the log shows below. Thanks for your help.
make: Entering directory '/lkp/benchmarks/pm-qa/thermal' ### ### thermal_00: ### list existing thermal-zones and cooling-devices in the system ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#thermal_00 ### Thermal Zone list ----------------- thermal_zone0 - x86_pkg_temp thermal_zone1 - x86_pkg_temp Cooling Device list ------------------- cooling_device0 - Processor cooling_device1 - Processor cooling_device10 - Processor cooling_device11 - Processor ... ### ### thermal_01: ### test/verify the thermal zone files are present in the sysfs and check the validity of the mode field, bindings and trip temperatures ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/PmQaSpecification#thermal_01 ### thermal_01.0: checking 'mode' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Err thermal_01.0: checking 'mode' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Err thermal_01.0: checking thermal_zone0 cur_mode=... Err thermal_01.0: checking thermal_zone1 cur_mode=... Err thermal_01.1: checking 'trip_point_0_temp' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.2: checking 'trip_point_0_type' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.3: checking 'thermal_zone0'/'trip_point_0_temp' ='0'... Err thermal_01.4: checking 'trip_point_1_temp' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.5: checking 'trip_point_1_type' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.6: checking 'thermal_zone0'/'trip_point_1_temp' ='0'... Err thermal_01.7: checking 'trip_point_0_temp' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.8: checking 'trip_point_0_type' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.9: checking 'thermal_zone1'/'trip_point_0_temp' ='0'... Err thermal_01.10: checking 'trip_point_1_temp' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.11: checking 'trip_point_1_type' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok checking thermal_01.12: checking 'thermal_zone1'/'trip_point_1_temp' ='0'... Err ... thermal_02: pass ### ### thermal_03: ### test/verify that temperature is increasing/decreasing as the load is increased/decreased ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/PmQaSpecification#thermal_03 ### thermal_03.0: glmark2 not found... skip thermal_03: skip ### ### thermal_04: ### test/verify the cooling device are lowering the temperature down ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/PmQaSpecification#thermal_04 ### thermal_04.0: checking cooling_device0:state=1 effective cool=-2000 ... Err thermal_04.1: checking cooling_device0:state=2 effective cool=1000 ... Ok thermal_04.2: checking cooling_device0:state=3 effective cool=3000 ... Ok thermal_04.3: checking cooling_device0:state=4 effective cool=3000 ... Ok thermal_04.4: checking cooling_device0:state=5 effective cool=3000 ... Ok thermal_04.5: checking cooling_device0:state=6 effective cool=4000 ... Ok thermal_04.6: checking cooling_device0:state=7 effective cool=3000 ... Ok thermal_04.7: checking cooling_device0:state=8 effective cool=4000 ... Ok thermal_04.8: checking cooling_device0:state=9 effective cool=4000 ... Ok thermal_04.9: checking cooling_device0:state=10 effective cool=5000 ... Ok thermal_04.0: checking cooling_device1:state=1 effective cool=-1000 ... Err thermal_04.1: checking cooling_device1:state=2 effective cool=3000 ... Ok thermal_04.2: checking cooling_device1:state=3 effective cool=5000 ... Ok thermal_04.3: checking cooling_device1:state=4 effective cool=3000 ... Ok thermal_04.4: checking cooling_device1:state=5 effective cool=4000 ... Ok thermal_04.5: checking cooling_device1:state=6 effective cool=4000 ... Ok thermal_04.6: checking cooling_device1:state=7 effective cool=4000 ... Ok thermal_04.7: checking cooling_device1:state=8 effective cool=5000 ... Ok thermal_04.8: checking cooling_device1:state=9 effective cool=4000 ... Ok thermal_04.9: checking cooling_device1:state=10 effective cool=4000 ... Ok thermal_04.0: checking cooling_device10:state=1 effective cool=-2000 ... Err thermal_04.1: checking cooling_device10:state=2 effective cool=3000 ... Ok thermal_04.2: checking cooling_device10:state=3 effective cool=5000 ... Ok thermal_04.3: checking cooling_device10:state=4 effective cool=6000 ... Ok thermal_04.4: checking cooling_device10:state=5 effective cool=5000 ... Ok thermal_04.5: checking cooling_device10:state=6 effective cool=4000 ... Ok thermal_04.6: checking cooling_device10:state=7 effective cool=3000 ... Ok thermal_04.7: checking cooling_device10:state=8 effective cool=3000 ... Ok thermal_04.8: checking cooling_device10:state=9 effective cool=4000 ... Ok thermal_04.9: checking cooling_device10:state=10 effective cool=4000 ... Ok thermal_04.0: checking cooling_device11:state=1 effective cool=-2000 ... Err ... ### ### thermal_05: ### test/verify the cpufreq cooling device are clipping the frequencies ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/PmQaSpecification#thermal_05 ### thermal_05.0: Cannot find cpufreq in cooling_device0...... skip thermal_05.0: Cannot find cpufreq in cooling_device1...... skip thermal_05.0: Cannot find cpufreq in cooling_device2...... skip thermal_05.0: Cannot find cpufreq in cooling_device3...... skip thermal_05.0: Cannot find cpufreq in cooling_device4...... skip thermal_05: skip ### ### thermal_06: ### test/verify that different trip points are crossed when load is maximum ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/PmQaSpecification#thermal_06 ### thermal_06.0: glmark2 not found... skip thermal_06: skip Thanks Xiang _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org https://lists.linaro.org/mailman/listinfo/linaro-dev