--- No uboot patch since uboot patch already in linaro uboot git
Signed-off-by: Jason Liu jason.hui@linaro.org --- arch/arm/boot/dts/mx51-babbage.dts | 30 ++++++++++++++++++++++++++++++ arch/arm/mach-mx5/Kconfig | 6 ++++++ arch/arm/mach-mx5/board-mx51_babbage.c | 6 ++++++ 3 files changed, 42 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/mx51-babbage.dts b/arch/arm/boot/dts/mx51-babbage.dts new file mode 100644 index 0000000..179f745 --- /dev/null +++ b/arch/arm/boot/dts/mx51-babbage.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +/ { + model = "Freescale i.MX51 Babbage"; + compatible = "fsl,mx51-babbage"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + }; + + memory { + device_type = "memory"; + reg = <0x90000000 0x20000000>; + }; + + chosen { + }; +}; diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 83ee088..aae51ee 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -38,6 +38,7 @@ comment "MX5 platforms:" config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" select SOC_IMX51 + select MX5_DT_COMMON select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART @@ -114,6 +115,11 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD
endchoice
+config MX5_DT_COMMON + bool + select USE_OF + select PROC_DEVICETREE + config MX51_EFIKA_COMMON bool select SOC_IMX51 diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index b2ecd19..30b92ca 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -399,6 +399,11 @@ static struct sys_timer mx51_babbage_timer = { .init = mx51_babbage_timer_init, };
+static const char *mx51_babbage_dt_match[] __initdata = { + "fsl,mx51-babbage", + NULL +}; + MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") /* Maintainer: Amit Kucheria amit.kucheria@canonical.com */ .boot_params = MX51_PHYS_OFFSET + 0x100, @@ -407,4 +412,5 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") .init_irq = mx51_init_irq, .timer = &mx51_babbage_timer, .init_machine = mx51_babbage_init, + .dt_compat = mx51_babbage_dt_match, MACHINE_END